Rode Microphones Complete Studio Kit, Includes AI-1 Audio Interface, NT1 Microphone, SMR Shockmount and Cables. Part: THE COMPLETE STUDIO KIT. The perfect first step into home recording Rode's AI-1 Audio Interface is stacked with incredible technology to ensure recording on your computer is easy, versatile and sounds superb.
The Complete Studio Kit comes with the AI-1, Rode's peerless NT1 large diaphragm condenser microphone, a shock mount and all cables. Ableton Live Lite Live 9 Lite is a customized version of the music making software Ableton Live. As for inputs: the AI-1's got both kinds... The AI-1's single input is a Neutrik Combo Jack, which takes both a 3-pole XLR (common to most microphones) and a quarter-inch jack common to most electric instruments like guitar, bass et al. Layering tracks is as easy as plug in, set level and go.
No cords barred (and other puns) The Complete Studio Kit comes with the Rode NT1 studio condenser microphone, a shock mount, pop-shield [lose stand mount], stand-mount, Rode XLR cable and USB-C/A cables to transfer data from your AI-1 to your computer and power - including 48V phantom power to your AI-1. Superior Headphone Amplifier onboard Not only does the AI-1 deliver crystal clear audio to your computer software, but headphones have never sounded sweeter thanks to the discrete studio-quality headphone output and level control. AI-1 USB Audio Interface The AI-1 USB Audio Interface adds studio-quality Input and Output capabilities to your PC or Mac, turning your recording software into a full recording setup. With its high quality Neutrik XLR-1/4 Combo Jack combined input and discrete Class-A preamp, the AI-1 allows you to connect a microphone or instrument or line level audio signal to your Mac/Windows computer for recording.
The AI-1 provides the necessary A/D conversion at up to 24 bit/96kHz. The AI-1 also allows playback and monitoring of audio either direct from the microphone or via playback from the recording software.
This is done via a high-quality discrete headphone amplifier and outputs via either the 1/4" headphone output on the front of the unit or the balanced 1/4" outputs on the rear of the unit. Ultra low-noise Class-A discrete preamplifier Sampling rate of up to 96kHz/24-Bit Premium discrete headphone amplifier XLR-1/4" Combo Jack Instrument / line level input 2 x Balanced 1/4" speaker outputs Rugged body with Satin Black Finish USB-C/3 connectivity NT1 Microphone The NT1 is a revolutionary new 1 diaphragm condenser microphone from Rode. Although the body of the new NT1 closely resembles the NT1-A, the microphone has been completely redesigned from the ground up, with the only shared component being the mesh grille. Rode's design engineers approached the NT1 as a marriage of innovation and tradition, starting with the capsule which is a completely new design. Codenamed the HF6, it is the perfect example of Rode's fusion of artistic design approaches and cutting-edge manufacturing techniques and features a sound signature reminiscent of the famous microphones of old while at the same time exhibiting extremely low noise.
Large 1 condenser capsule with gold-plated membrane Cardioid polar pattern Internal Rycote Lyre based capsule shock mounting system Ultra-low noise, self noise of only 4.5dB (A) State-of-the-art surface mount electronics It has been developed with a focus on detailed midrange response, coupled with silky smooth high frequencies and warm, round, bass reproduction to make the NT1 an absolute standout in its class. In another world-first for Rode, the transducer itself is suspended inside the microphone using Rycote's industry-leading Lyre system, minimizing external vibrations at the capsule level. The capsule is then married to high-grade electronics that have been designed to provide the lowest noise level of any studio microphone available. The NT1 is an incredibly quiet microphone, measuring only 4.5dBA of self-noise.
Its body is machined from 6061 aluminum and then nickel plated for resistance against corrosion. Finally it is coated in a durable, military-grade ceramic layer, using advanced electrostatic application techniques developed by Rode to ensure an extremely hard wearing finish that is resistant to scratches or marks. The NT1 is supplied with the revolutionary new Rode SMR shock mount.Featuring a unique double-Lyre suspension system, the SMR enhances the existing superior vibration cancellation of Rycote's Lyre system by using a smaller inner Lyre to act as a tensioning element. This maintains each Lyre in the neutral position where it is most efficient at cancelling vibration.
The SMR's removable all-metal pop filter is as effective as it is visually striking, providing an integrated solution for plosive protection that is easily washable and designed to last as long as the shock mount and microphone. 44.1 kHz 48 kHz 88.2 kHz 96 kHz. 2x 1/4" (impedance balanced) 1x 1/4" (headphones).
Mac OS 10.10 or later Windows 7 or later. XLR/MIC Input: 104dBu Instrument Input: 104dBu. XLR/MIC Input: -128dB-A at Maximum Gain (Source Impedance 150 ohms, 20Hz-20kHz, A-weighted).XLR/MIC Input: 20Hz - 20kHz better than +/-1dB (Measured after ADC) Instrument Input: 20Hz - 20kHz better than +/-1dB (Measured after ADC) Monitor Output: 20Hz - 20kHz better than +/-1dB. XLR/MIC Input: 0dB to 45dB Instrument Input: 0dB to 45dB. XLR/MIC Input: 1.3K Ohms Instrument Input: 0.9M Ohms. At 1% THD: 32Ohms, 24mW 300Ohms, 245mW. JFET impedance converter with bipolar output buffer. 8.0mV (At 1kHz, 1% THD into 1KOhms load). 29.0dB re 1 Volt/Pascal (35.00mV at 94 dB SPL) +/- 2 dB at 1kHz. +24V phantom power required from mixer or interface +48V phantom power required from mixer or interface. AI-1 Audio Interface (HxWxD): 38 x 124 x 100mm (1.50 x 4.88 x 3.94") (with knobs) Chassis: 88mm (3.46") NT1 (HxWxD): 187 x 50 x 50mm (7.36 x 1.97 x 1.97") SMR Shock Mount: 5.0 x 9.0 x 8.3" (12.70 x 22.86 x 21.08cm). AI-1 Audio Interface: 560g (19.75 oz) NT1 Microphone: 440g (15.52 oz) SMR Shock Mount: 9.2 oz (260.82g). For over 35 years we have been serving professionals as well as amateurs in the photographic, video, digital imaging and telescope fields. We offer the best combination of quality services, vast selection, knowledgeable staff, and competitive pricing. Adorama Camera is your #1 source for the best and newest products in the photographic industry, and the largest inventory of items such as Digital Cameras, Digital Camera Accessories, Memory Cards, 35mm Cameras, Medium Format Cameras, Lenses, Video Cameras, TV's, MP3 Players, Binoculars, Telescopes, Scanners, Inkjet, Dye-Sub & Laser Printers, Office Fax machines, Shredders, Projectors, Inkjet Paper, Photographic Accessories, Filters, Batteries, Cases, Tripods, Flashes, Lighting & Studio Equipment, Film, Darkroom Products and Audio Video Equipment. In an effort to comply with our Authorized Dealer contracts with the manufacturers and to best control our inventory levels we reserve the right to limit quantities or cancel orders to Resellers and Exporters.
Please note: Inventory is not reserved until the item is paid for. These charges must be borne by the recipient. Adorama has no control over these charges and cannot predict what they might be.
If the item does not have the option, please don't ask. No guarantees for other times. Approved Change Requests may not be updated on eBays portal, please check the emails.
Memory cards and any other Blister Pack items are not returnable once opened. Printers are not returnable once the Toner Cartridges have been installed or released.
The item "Rode Microphones Complete Studio Kit with AI-1 Audio Interface and NT1 Mic" is in sale since Friday, February 9, 2018. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Microphones & Wireless Systems".
The seller is "adoramacamera" and is located in Elizabeth, New Jersey. This item can be shipped to United States, Canada.